COVID-19 Update
A message from John Selldorff on the COVID-19 virus and what LNCA is doing in response. Normal ship times remain in effect for available products.
Search radiant
explore our collections

120V Single Pole/3-Way Occupancy Sensor, Tri-Color
Sorry! That combination does not exist.
General Info
Color: Tri-Color (Ivory, White, Light Almond)
Number Of Poles: 1
Number Of Wires: 2
Listing Agencies/Third Party Certifications
RoHS: Yes
cULus: Yes
UN SPSC: 39121502
Construction Information
Component 4: 78500749657
Depth (US): 1.88"
Height (US): 2.63"
Width (US): 1.69"
Technical Information
Volts (AC): 120VAC, 60Hz
Watts: 0-600W All
Country Of Origin
Country Of Origin: CHINA
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
LEED Contribution: Yes
You Might Like
Tru-Universal Single Pole/3-Way Dimmer, Tri-Color
(3 Reviews)
120V Single Pole/3-Way Occupancy Sensor, Tri-Color
(6 Reviews)
4-Button Digital Timer, White
(25 Reviews)
Night Light with Single-Pole, 3-Way Switch, White
(8 Reviews)
Rated 3 out of 5 by from Poor Instructions I was this close to returning to Lowe’s before coming on this site to learn that the brown wire is not needed. After eliminating that wire, it worked like a champ. I also learned that their is no manual On/Off, only manual On. My wife is going to have fits with that limitation. May be going back anyway.
Date published: 2019-12-02
Rated 1 out of 5 by from Poor instructions This faux "switch" comes with RED/BLACK/YELLOW wires. The instructions do no not clearly state what the yellow wire is for. Found out that you can not use it to turn off the light/fan. You need to wait until it runs its cycle of 1/5/10 mins etc. Bought at Lowes - Will be returning it.
Date published: 2019-03-12
Rated 4 out of 5 by from Works great Hooked it up in my closet and it works great. After realizing the ground is not a wire but green screw attached to the side I hooked everything right up and it worked great
Date published: 2019-04-30
Rated 1 out of 5 by from Lousy instructions... The instructions do not properly address what to do with the existing wires. For example, when wiring to a second Sensor switch in a 3-way circuit, nothing is mentioned about the second black runner wire. The first runner is connected to the yellow wire on the switch which is then connected to the yellow wire on the second switch. The red switch wire is not connect and capped. The Line wire is connected to the black wire on the switch but what do you do with the second runner wire? Cannot get the switches to work as shown.
Date published: 2020-07-07
Rated 5 out of 5 by from Works great after a little learning curve. Some of the reviews are complaining about the instruction but really the switch operates well. The wiring was simple after turning off the breaker, and my garage lights stay on for 5 minutes at a time. I replaced an annoying lutron motion sensor switch with this Legrand and it works much better. Thanks.
Date published: 2020-05-15
  • y_2020, m_9, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_RRW600UTC, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 94ms

I have a bluetooth bathroom exhaust fan (no light just fan) I'm running new wiring throughout the bathroom. Can I use this sensor

Asked by: Oscar
Yes, the sensor just requires 120V circuit and it must be Grounded.
Answered by: Legrand Technical Support
Date published: 2020-08-28

Will the model RRW600UTCCCV4 control one or two CFL fixtures in 3 way mode? All the documentation online does not say. The packaging makes is seem as though the switch will only work with an led. Afraid to open if I'm going to need to return.

Asked by: The Real Jay Lo
The sensor is designed to handle ALL LOADS as long as you do not exceed the maximum wattage rating of 600W's.
Answered by: Legrand Technical Support
Date published: 2020-08-05

Can we please get some clear, explicit clarification of ALL wires in a 3-way circuit? Please include all three colored wires on the Legrand unit, as well as building wiring (for those of us used to standard 3-way wiring).

Asked by: Sathington Willoughby
Please see the attached wiring diagrams and you can contact technical support if you need further assistance. Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us -
Answered by: Legrand Technical Support
Date published: 2020-07-27

Wiring 3-way, does each switch maintain ON according to its own programming, independent of other switches? Or does it work like a standard 3-way, where each switch can turn ON or OFF regardless of other switches? -->I need to maintain ON independently.

Asked by: Sathington Willoughby
Either sensor in the 3way will turn the load ON and it will remain ON as long as motion is detected by either sensor.
Answered by: Legrand Technical Support
Date published: 2020-07-27

Does this switch sense daylight so the light will not turn on?

Asked by: A Guy
No, this sensor does not have ambient light detection feature.
Answered by: Legrand Technical Support
Date published: 2020-05-04

How do I reprogram the RRW600U?

Asked by: abcd
A link to the instruction sheet is attached and you can reference Table 1 to program the time delay and Table 2 for occupancy and vacancy mode programming: You can also contact if you need assistance with it: Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us -
Answered by: Legrand Technical Support
Date published: 2020-04-25

I do not understand the multilocation directions when trying to install 2 motion sensors for the same light. How do I determine the runner wire? And which wire for the switch and wall does or does not need to be used? I've tried everything...

Asked by: melpomene15
Hire an electrician
Answered by: Jayelec
Date published: 2020-07-24

Can I use 2 of these switches for the same light? I have a switch at the top and bottom of some stairs. I'd like both of them to be motion sensors. Thanks!

Asked by: melpomene15
Good Morning, Yes. Two of these can be used in a 3-way system. Hope this helps!
Answered by: Tech Support
Date published: 2020-01-08
  • y_2020, m_9, d_24, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_RRW600UTC, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 31ms
  • bvseo-msg: The getReviews method is only supported when is configured for structured markup. Please submit a support ticket at to have your Bazaarvoice configuration updated to use for structured markup.;

Chat Is Currently Offline

Leave a message here to request a call back from our customer support team.