Brand
Choose from one of Legrand's brands.
Color
The color of the product itself
Warranty Type
The product warranty that accompanies the specific product.
Sensing Range
The total Possible Sensing Capability of the Sensor, Beginning After the Deadband, and Extending Out as Far as the Sensor is Able to Reach Effectively
Accessories
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Emergency Lighting Control Unit for KO MountingELCU-200 Wattstopper
Self-contained device that allows any standard lighting control device to control emergency lighting.
Other Options Available -
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.LI Enclosure for 8 interior, SurfaceLENC8S WattstopperLENC panel enclosures are designed specifically to work with all configurations of LMCP panel interiors containing 8 to 48 relays.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Emergency Lighting Control UnitELCU-100 WattstopperWattstopper’s Emergency Lighting Control Unit (ELCU) is a self-contained, emergency lighting control device.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Contactor, 4 Pole, Normally Closed, 277V CoilC277NC WattstopperThe Multi-pole Contactor is a compact, electrically held lighting contactor used for controlling lighting and other electrical loads in Watt Stopper Lighting Integrator (LI) lighting control panels.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.LI Enclosure w/48 Relay Capacity Interior, Surface MountLENC48S WattstopperLENC panel enclosures are designed specifically to work with all configurations of LMCP panel interiors containing 8 to 48 relays.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Plenum rated coupler splitter for DLMLMRJ-CS8 WattstopperLMRJ series couplers, splitters and other accessories connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM Photocell Input Module w/Analog PhotocellsLMIO-301 WattstopperThe LMIO-301 photocell input module is an accessory for a networked Digital Lighting Management (DLM) installation that allows an LMSM segment manager or LMCP panel to read ambient light levels for use in controlling exterior lighting or interior lighting installed in brightly daylit spaces such as atriums.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.AC Low Voltage PhotocellEM-24A2 WattstopperThe EM-24A2 and EM-24D2 are low voltage photocells used for controlling exterior lighting.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Contactor, 4 Pole, Normally Open, 120V CoilC115NO WattstopperThe Multi-pole Contactor is a compact, electrically held lighting contactor used for controlling lighting and other electrical loads in Watt Stopper Lighting Integrator (LI) lighting control panels.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DC Low Voltage PhotocellEM-24D2 WattstopperThe EM-24A2 and EM-24D2 are low voltage photocells used for controlling exterior lighting.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.LightSaver Enclosure 12in X 12in X 4inLS-E12 WattstopperLightSaver Enclosures are suitable for use in housing LightSaver control system components, including control modules (LCO or LCD), and the BT Power Pack.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Non plenum rated splitter fo r LMRJ cablesLMRJ-S8 WattstopperLMRJ series couplers, splitters and other accessories connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Contactor, 4 Pole, Normally Open, 277V CoilC277NO WattstopperThe Multi-pole Contactor is a compact, electrically held lighting contactor used for controlling lighting and other electrical loads in Watt Stopper Lighting Integrator (LI) lighting control panels.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.LI Enclosure w/8 Relay Capacity Interior, 24 Size Tub, Surface MountLENC8-24S WattstopperLENC panel enclosures are designed specifically to work with all configurations of LMCP panel interiors containing 8 to 48 relays.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.LI Enclosure w/8 Relay Capacity Interior, Flush MountLENC8F WattstopperLENC panel enclosures are designed specifically to work with all configurations of LMCP panel interiors containing 8 to 48 relays.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM Photocell Input Module w/Analog Photocells, USALMIO-301-U WattstopperThe LMIO-301 photocell input module is an accessory for a networked Digital Lighting Management (DLM) installation that allows an LMSM segment manager or LMCP panel to read ambient light levels for use in controlling exterior lighting or interior lighting installed in brightly daylit spaces such as atriums.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage Switch Color Kit, 1-Button, WhiteLVSW-KIT-101-W Wattstopper
The LVSW-KIT-100 Series are replacement button trim color kits that are compatible with all LVSW-100 Series Low Voltage Switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage Switch Color Kit, 2-Button, WhiteLVSW-KIT-102-W Wattstopper
The LVSW-KIT-100 Series are replacement button trim color kits that are compatible with all LVSW-100 Series Low Voltage Switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage Switch Color Kit, 3-Button, WhiteLVSW-KIT-103-W Wattstopper
The LVSW-KIT-100 Series are replacement button trim color kits that are compatible with all LVSW-100 Series Low Voltage Switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage Switch Color Kit, 4-Button, WhiteLVSW-KIT-104-W Wattstopper
The LVSW-KIT-100 Series are replacement button trim color kits that are compatible with all LVSW-100 Series Low Voltage Switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.RTest kit for LMRJ cablesLMRJ-TK WattstopperLMRJ series couplers, splitters and other accessories connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage Switch Color Kit, 8-Button, BlackLVSW-KIT-108-B WattstopperThe LVSW-KIT-100 Series are replacement button trim color kits that are compatible with all LVSW-100 Series Low Voltage Switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Digital Commissioning Tool w/USBLMCT-100-2 Wattstopper
The LMCT-100-2 Wireless Configuration Tool is a handheld tool for advanced remote configuration of any Wattstopper Digital Lighting Management (DLM) system.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM Wireless Configuration Tool with USBLMCT-100-2-U WattstopperThe LMCT-100-2 Wireless Configuration Tool is a handheld tool for advanced remote configuration of any Wattstopper Digital Lighting Management (DLM) system.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.HDR Relay, Heavy Duty, 1 poleHDR-11 WattstopperThe HDR-11 is used for control of lighting circuits and other electrical loads in Wattstopper’s Peanut Panels, Lighting Integrator Control Panels and Lighting Management Control Panels.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM Communication to HDLW4 Dataline Converter (5 Pk)LMRJ-WA-5PK WattstopperLMRJ series couplers, splitters and other accessories connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring.