DLM Shade Controller, Ten Shades
LMSH-PS610
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
Please refer to our 3rd Party Integration Guides under the Resources section of this page. The LMSH-PS602 and LMSH-PS610 are DLM-based shade room controllers, which provide low voltage power and control for up to two or ten motorized shades. The controllers accept 120/277VAC input line voltage and are typically mounted in the ceiling to a four-square junction box. The controllers provide power and control for shades on the shade bus and connect and power switches on the shade In-Room-Bus (IRB). The DLM motorized room-based shade control system is easy to install and program. Motors and power supplies are connected using a four-wire shade bus with pre-configured cables and simple to configure bus system. The switches are connected using standard DLM in-room-bus (IRB) RJ45 cables for foolproof installation. The shade motors have a unique counter balanced design that is very quiet and saves energy. The patented motor design allows shades to be pulled into position from the hembar without damage to the motor or shades.
Number of Devices
10
- 2
- 10
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Product Details
Please refer to our 3rd Party Integration Guides under the Resources section of this page. The LMSH-PS602 and LMSH-PS610 are DLM-based shade room controllers, which provide low voltage power and control for up to two or ten motorized shades. The controllers accept 120/277VAC input line voltage and are typically mounted in the ceiling to a four-square junction box. The controllers provide power and control for shades on the shade bus and connect and power switches on the shade In-Room-Bus (IRB). The DLM motorized room-based shade control system is easy to install and program. Motors and power supplies are connected using a four-wire shade bus with pre-configured cables and simple to configure bus system. The switches are connected using standard DLM in-room-bus (IRB) RJ45 cables for foolproof installation. The shade motors have a unique counter balanced design that is very quiet and saves energy. The patented motor design allows shades to be pulled into position from the hembar without damage to the motor or shades.
- Connect Power Supplies together to form a larger shade network
- Two different shade room controller options, LMSH-PS610 for up to 10 shades and LMSH-PS602 for up to two shades
- Plug n’ Go™ (PnG) automatic configuration assigns addresses and configures all shade room controllers, shade motors, and shade switches
- Plug n’ Go™ (PnG) automatic configuration along with Push n’ Save and Push n’ Learn for system personalization
- Plug to other components (switches) using Cat 5e cables with RJ45 connectors eliminating wiring errors
- Shade room controllers provide buttons for shade control and system configuration to allow testing and control of the system while installing
- Component of Digital Lighting Management integrated shade control system
Specifications
General Info
| Color | White | ||
| Product Type | Load Controller | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Installation Location | Ceiling | ||
| Warranty Type | Lifetime | ||
| Standard | UL, cUL, RoHS | ||
| UPC Number | 842854000054 |
Dimensions
| Product Depth US | 2.5 in | ||
| Product Height US | 5.7 in | ||
| Product Volume US | 166.0 cu in | ||
| Product Width US | 6.1 in | ||
| Product Weight US | 1.7 lb |
Listing Agencies / 3rd Party Agencies
| cUL Listed | Yes |
Additional Information
| Product Has Potential to Contribute to LEED | Yes | This product contributes to earning credits in the LEED rating system. Visit our LEED with Legrand webpage for more information. |
Technical Information
| Current Draw | 800 mA | ||
| Number of Connections | 4 | ||
| Wire Connection Type | Plug-In, RJ-45 | ||
| Compatibility | DLM Wired | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Mounting Type | 4-11/16 in J-Box | ||
| Number of Devices | 10 | ||
| Operating Temperature | 0°-55°C, 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Maximum Power | 115 W @ 120 VAC | ||
| Output Voltage | 24 VDC | ||
| Bus Power Supply | 150 mA @ 24 VDC, Class 2 |
Resources (9)
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q & A
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMAC-131-M | Wattstopper
The LMAC-131-M is a Phase Dimming Room Controller compatible with DLM
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
DALI-SWITCH-SO | Wattstopper
The DALI Switch SO provides the capability to switch non-dimming loads within a DALI based Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
IC-DIN-II | Vantage
The DIN version of the InFusion controller—often used in European or Marine applications—provides seamless integration of all your subsystems.





