DLM PLUGLOAD CONTROLLER 20A METERED
LMPL-111-20M
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The LMPL-111-20M Plug Load Controller contains a 20 amp relay for on/ off control of connected outlets, and a highefficiency intelligent switching power supply. This plug load controller works as part of the Wattstopper Digital Lighting Management (DLM) system and enables energy-efficient control of plug loads.
BAA
No
- No
- Yes
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Plenum-rated controller with line voltage relay and intelligent switching power supply
- Knockout mounting for easy installation
- Advanced real time metering of voltage and current (+/- 2% accuracy)
- Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
- Accepts occupancy sensor signal or schedule events for energy saving control of plug load
- Plugs to other components using Cat 5e cable and RJ45 connectors eliminating wiring errors
Specifications
General Info
| Color | White | ||
| Product Series | LMPL | ||
| Type | Room Controller | ||
| Material | ABS | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Metered | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 88T9, UL 2043, cUL, FCC part 15, PEP, RoHS | ||
| UPC Number | 754182944200 |
Dimensions
| Product Depth US | 2.0 in | ||
| Product Height US | 4.4 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 3.9 in | ||
| Product Weight US | 0.6 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Number of Connections | 2 | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45 | ||
| Dimming Compatibility | On/Off | ||
| Compatibility | DLM Wired | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120 V | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Load Rating | 20 A @ 120 VAC | ||
| Location Rating | Dry | ||
| Mounting Type | 1/2 in Knockout, 4 in Deep J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-55°C, 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC | ||
| Storage Temperature | 23° - 176° F |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WRC-15-1-W | Wattstopper
Wireless Receptacle Control products facilitate Auto-On/AutoOff occupancy-based control of plug loads without the need to wire receptacles to power packs.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
BF-SDS10V-AST | Wattstopper
The BF-SDS10V-AST takes a 0-10V dimming signal and a fixed line voltage input and converts it to a phase-adaptive dimmed output for up to 1300W for a 277V load and 750W for a 120V load.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WRC-20-2-W | Wattstopper
Wireless Receptacle Controls facilitate occupancy-based AutoOn/Auto-Off control of plug loads without the need to wire receptacles to room controllers.