DLM WIRELESS PLUGLOAD CONTROLLER 20A
LMPL-611-20M
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMPL-611-20M Plug Load Controllers include a 20 amp relay for on/ off control of connected outlets, and a high-efficiency switching power supply. They enable energy-efficient control of plug loads as a part of the Wattstopper Digital Lighting Management (DLM) system.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Built-in IPv6 Mesh and Bluetooth® low energy technology antennas provide robust signal strength and reliable communication
- Plug n’ Go™ automatic configuration and programming with DLM Configuration App
- Accepts occupancy sensor signal for energy saving control of plug loads
- Uses IPv6 wireless to establish network communication with DLM wireless devices
- Plenum-rated controller with line voltage relay and switching power supply
- Commissioning using DLM Configuration App
Specifications
General Info
| Color | White | ||
| Product Series | LMPL | ||
| Type | Room Controller | ||
| Material | ABS | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Metered, Wireless | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 88T9, UL 2043, cUL, FCC part 15, RoHS | ||
| UPC Number | 754182944194 |
Dimensions
| Product Depth US | 2.0 in | ||
| Product Height US | 4.4 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 4.0 in | ||
| Product Weight US | 0.6 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Antenna | Integrated, Internal | ||
| Antenna Pattern | Omni-directional | ||
| Number of Connections | 0 | ||
| Topology | Wireless Mesh | ||
| Wire Connection Type | Wireless | ||
| Dimming Compatibility | On/Off | ||
| Compatibility | Bluetooth, DLM Wireless (IPv6) | ||
| Encryption | AES 128-bit | ||
| Frequency Band | 2.4 GHz | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120 V | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Load Rating | 20 A @ 120 VAC | ||
| Location Rating | Dry | ||
| Mounting Type | 1/2 in Knockout, 4 in Deep J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-60°C, 32°-140°F | ||
| Operating Temperature Max | 140 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Security Method | Data Encryption | ||
| Storage Temperature | 23° - 176° F | ||
| Wireless Range | Bluetooth, up to 30 ft, IPv6 6LoWPAN, up to 100 ft |
Resources
Installation Instructions
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMPL-111-20M | Wattstopper
The LMPL-111-20M Plug Load Controller contains a 20 amp relay for on/ off control of connected outlets, and a highefficiency intelligent switching power supply.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WRC-15-1-W | Wattstopper
Wireless Receptacle Control products facilitate Auto-On/AutoOff occupancy-based control of plug loads without the need to wire receptacles to power packs.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
BF-SDS10V-AST | Wattstopper
The BF-SDS10V-AST takes a 0-10V dimming signal and a fixed line voltage input and converts it to a phase-adaptive dimmed output for up to 1300W for a 277V load and 750W for a 120V load.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WRC-20-2-W | Wattstopper
Wireless Receptacle Controls facilitate occupancy-based AutoOn/Auto-Off control of plug loads without the need to wire receptacles to room controllers.