Dual Tech Wall Switch Occupancy Sensor, 120/277V, White
DSW-302-W
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The DSW-302 dual technology wall switch sensor turns lights ON and OFF based on occupancy and contains two relays for controlling two independent lighting loads or circuits. It combines the benefits of passive infrared (PIR) and ultrasonic detection technologies for high sensitivity to small and large movements. The DSW-302 replaces existing wall switches and fits a standard decorator wall plate.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Collection consolidated of in 347 V to white option
- High sensitivity and dense coverage for exceptional performance
- Two relays for control of two separate lighting loads or circuits
- Color-matched lens and low profile for appealing design
- 120/240/277 VAC and 347 VAC models
- Defaults to Manual-ON operation for maximum energy savings
- Retrieving data. Wait a few seconds and try to cut or copy again.
Specifications
General Info
| Color | White | ||
| Product Type | Sensor, Wall Switch | ||
| Material | ABS | ||
| Finish | Gloss | ||
| Application Sector | Commercial | ||
| Product Family / Series / Group | Standalone | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Adjustable Time Delay, Dual Relay, Indicator Lights, Light Level Sensor, Sensitivity Adjustment, Test Mode, Walkthrough Mode | ||
| Included | Mounting Screws | ||
| Installation Location | Wall | ||
| Switch Type | Motion Sensor, Push | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, FCC part 15, Complies with 2017 NEC requirements, RoHS | ||
| UPC Number | 754182935505 |
Dimensions
| Product Depth US | 1.8 in | ||
| Product Height US | 4.1 in | ||
| Product Volume US | 35.1 cu in | ||
| Product Width US | 1.8 in | ||
| Product Weight US | 0.3 lb |
Additional Information
| Security | Yes | This product is ioXt certified | |
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Number of Rockers | 0 | ||
| On Function | Selectable Auto/Manual | ||
| Requires Neutral Wire | No | ||
| Wire Connection Type | Flying Leads | ||
| Has Battery | No | ||
| Indicator | PIR Detection LED, Selectable audible alert for impending shutoff, Ultrasonic Detection LED | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/277 VAC | ||
| Light Level Adjustment | 8-180 fc | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Load Rating | 1000 W @ 120 VAC, 1200 W @ 240/277 VAC | ||
| Location Rating | Dry | ||
| Mounting Type | In-Wall | ||
| Number of Buttons | 2 | ||
| Number of Poles | Multi-Location | ||
| Timer Type | DIP Switch | ||
| Timer Duration | 5 Minutes, 15 Minutes, 30 Minutes | ||
| Operating Temperature | 0°-55°C, 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Sensing Range | Major motion: PIR 35 x 30 ft, Ultrasonic 20 x 20 ft, Minor motion: PIR 20 x 15 ft, Ultrasonic 15 x 15 ft | ||
| Sensitivity Adjustment | PIR (Min/Max), Ultrasonic (0-100%) | ||
| Sensor Type | Occupancy | ||
| Sensor Technology | Dual Technology, Passive Infrared (PIR), Ultrasonic | ||
| Sensor Coverage Pattern | 180 ° | ||
| Sensor Mounting Height | 4 ft | ||
| Ultrasonic Frequency | 40 kHz | ||
| Storage Temperature | 23° - 176° F, -5° - 80° C | ||
| Engraving Type | Blank |
Resources
Installation Instructions
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WMPAC525F | Wiremold
The WMPAC525F and WMPAC526F In-Wall recessed storage box with finishing flange simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WMPAC527P4-KIT | Wiremold
The WMPAC525, WMPAC526 and 527 In-Wall Recessed Storage Boxes simplify flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMPB-100 | Wattstopper
The LMPB-100 Digital Power Booster includes a high-efficiency switching power supply to add power to a DLM local network.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EFSC | Wiremold
Replacement Trim Flange & Cover Assembly for the EFSB2 & EFSB4 Evolution Series Wall Boxes
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EHWB-SPACER-BK | Wiremold
Used to close off openings when certain combinations of standard width device plates leave open spaces.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WP1014LAV1 | On-Q
Cable Access Strap
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EFSB4 | Wiremold
The new Evolution Series Wall Boxes bring power, communications and A/V where you need it most.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EFS-TUN | Wiremold
Replacement Tunnel for the EFSB2 & EFSB4 Evolution Series Wall Boxes
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EHWB-MB | Wiremold
Allows wall box to be secured to wall in both new work and old work applications.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
44400 | Pass and Seymour
Direct Mount Boxes



