Wattstopper PLUS, Area Lighting Controller w/0-10V Dimming, Damp Rated
EN-ALC-1R10V-GB2BKDR
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The Area Lighting Controller (ALC) provides a high-power switching and dimming interface between a group of luminaires and the GreenBus™ communication network. Individually addressable with the Wattstopper PLUS Lighting Control System, the ALC switches a single wired zone of multiple luminaires ON or OFF via an integral high current relay while setting the zone's overall light level with a 0-10V dimming output wired to the luminaires' dimming ballasts or LED drivers. The ALC's dimming output is fully isolated and suitable for installation as either an NEC Class 2 or Class 1 circuit. The ALC can switch an entire circuit of electrical loads and is suitable for general purpose plug load control. It replaces the need for standard power relays or switch packs and is Damp Rated.
Location Rating
Damp
- Damp
- Dry
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Product Details
The Area Lighting Controller (ALC) provides a high-power switching and dimming interface between a group of luminaires and the GreenBus™ communication network. Individually addressable with the Wattstopper PLUS Lighting Control System, the ALC switches a single wired zone of multiple luminaires ON or OFF via an integral high current relay while setting the zone's overall light level with a 0-10V dimming output wired to the luminaires' dimming ballasts or LED drivers. The ALC's dimming output is fully isolated and suitable for installation as either an NEC Class 2 or Class 1 circuit. The ALC can switch an entire circuit of electrical loads and is suitable for general purpose plug load control. It replaces the need for standard power relays or switch packs and is Damp Rated.
- Adjusts light levels to respond to variable lighting requirements
- Enables scheduling luminaire group operation to lower energy use during off-peak occupancy
- Customizing lighting scenes for tailored experiences/tasks
- Allows adjustment of luminaire group assignments for modified space layouts
Specifications
General Info
| Color | Black | ||
| Product Type | Load Controller | ||
| Material | Plastic | ||
| Finish | Plastic | ||
| Application Sector | Commercial | ||
| Product Family / Series / Group | Wattstopper PLUS | ||
| Product Line | Wattstopper | ||
| Country Of Origin | Canada | ||
| Installation Location | Above Ceiling | ||
| Warranty Type | 5-Year | ||
| UPC Number | 840356701462 |
Dimensions
| Product Depth US | 1.9 in | ||
| Product Height US | 1.75 in | ||
| Product Width US | 1.85 in | ||
| Product Weight US | 3.3 oz |
Listing Agencies / 3rd Party Agencies
| FCC Compliant | Yes | ||
| cUL Listed | Yes |
Additional Information
| Energy Savings | Yes | ||
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Amperage | 20 A | ||
| Current Draw | 30 mA | ||
| Number of Connections | 2 | ||
| Topology | Daisy Chain | ||
| Wire Connection Type | GreenBus | ||
| Dimming Compatibility | 0-10 V | ||
| Compatibility | Wattstopper PLUS Wired | ||
| Contact Configuration | N-C | ||
| Contact Rating | 20 Amp, 120/277 VAC | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 24 V | ||
| Location Rating | Damp | ||
| Mounting Type | 1/2 in Knockout | ||
| Number of Relays | 1 | ||
| Operating Temperature | 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Bus Power Supply | 650 mA @ 24 VDC, Class 2 |
Resources (5)
Cutsheet
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q & A
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ESRLB-U | Wattstopper
The ESRLB-U Emergency Relay allows for local power sense, bringing fixtures to full brightness on loss of normal power
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMJA-IO-R-34 | Wattstopper
The LMJA-IO-R-34 is designed for remote monitoring and control applications that enable end-to-end automation and device-to-enterprise integration.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EN-PCDM-GB2 | Wattstopper
The Phase-Cut Dimming Module (PCDM) provides an interface between the phase-cut dimmable (forward- and reverse-phase) luminaires and the Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMAC-131-M | Wattstopper
The LMAC-131-M is a Phase Dimming Room Controller compatible with DLM
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
DALI-SWITCH-SO | Wattstopper
The DALI Switch SO provides the capability to switch non-dimming loads within a DALI based Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
IC-DIN-II | Vantage
The DIN version of the InFusion controller—often used in European or Marine applications—provides seamless integration of all your subsystems.
