Wattstopper PLUS ESRN Emergency Lighting Load Control Relay, Yellow
ESRN
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The Wattstopper PLUS ESRN UL924 Emergency Lighting Automatic Load Control Relays are designed for applications that require an emergency load to be switched on during a loss of normal power.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Product Details
The Wattstopper PLUS ESRN UL924 Emergency Lighting Automatic Load Control Relays are designed for applications that require an emergency load to be switched on during a loss of normal power.
- 0-10 Vdc dimmer override
- Up to 16 Amp electronic ballast
- LED indicators for normal voltage, emergency voltage, and load status
Specifications
General Info
| Color | Yellow | ||
| Product Type | Relay | ||
| Material | Plastic | ||
| Finish | Plastic | ||
| Application Sector | Commercial | ||
| Product Family / Series / Group | Wattstopper PLUS | ||
| Product Line | Wattstopper | ||
| Country Of Origin | United States | ||
| Features | Emergency Relay | ||
| Installation Location | Above Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | cUL, RoHS | ||
| UPC Number | 840356702384 |
Dimensions
| Product Depth US | 4.57 in | ||
| Product Height US | 1.81 in | ||
| Product Width US | 4.0 in | ||
| Product Weight US | 0.68 lb |
Listing Agencies / 3rd Party Agencies
| cUL Listed | Yes |
Additional Information
| Product Has Potential to Contribute to LEED | Yes | This product contributes to earning credits in the LEED rating system. Visit our LEED with Legrand webpage for more information. | |
| Energy Savings | Yes |
Technical Information
| Current Draw | 118 mA | ||
| Wire Connection Type | Wire Leads | ||
| Dimming Compatibility | 0-10 V | ||
| Compatibility | DALI, Wattstopper PLUS Wired, Wattstopper PLUS Wireless | ||
| Contact Rating | 16 Amp, 277 VAC, 20 Amp, 277 VAC | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120 to 277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Mounting Type | 1/2 in Knockout | ||
| Number of Relays | 1 | ||
| Operating Temperature | -30°-140°F | ||
| Operating Temperature Max | 140 °F | ||
| Operating Temperature Min | -30 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) |
Resources (5)
Cutsheet
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q & A
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EN-PCDM-GB2 | Wattstopper
The Phase-Cut Dimming Module (PCDM) provides an interface between the phase-cut dimmable (forward- and reverse-phase) luminaires and the Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMAC-131-M | Wattstopper
The LMAC-131-M is a Phase Dimming Room Controller compatible with DLM
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
DALI-SWITCH-SO | Wattstopper
The DALI Switch SO provides the capability to switch non-dimming loads within a DALI based Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
IC-DIN-II | Vantage
The DIN version of the InFusion controller—often used in European or Marine applications—provides seamless integration of all your subsystems.
