Shading

The LMSH-PS602 and LMSH-PS610 are DLM-based shade room controllers, which provide low voltage power and control for up to two or ten motorized shades

The RZ2 Range Extender may be used as part of a standalone Zigbee environment or to extend the range of a Zigbee remote. The RZ2 plugs directly into an outlet and has a screw tab for more permanent installation.

Shade Bus connectors provides installers the option to create their own custom length cables using bulk wire with a crimper and connectors. 

LMSH-SB series cables have four wires and are designed to connect DLM shades and power supplies together. There are a variety of lengths and accessories that make cable selection and system layout easy and intuitive. The DLM shade control system can be wired together without tools using the wiring and accessories in the LMSH-SB series.

Crimping Tool provides installers the option to create their own custom length cables using bulk wire with the crimper and connectors. 

Bulk wiring provides installers the option to create their own custom length cables using bulk wire with a crimper and connectors. 

The LMSH-SBTEST allows the installer to test the shade bus for correct connection during installation.

LMSH-SW10X Series Wall Switches are low voltage devices for manual control of shades from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any shade motors connected to DLM shade controllers.

The SBCA-S2 is a Y splitter cable designed to make wiring of dual shade configurations easier using one port on the SBE4 extender. 

The  LMSH-SBE4 is a shade bus extender that has four parallel female connections that allow the SB cables to extend the shade bus without regard to topology.

The DLM Shade Motors feature a wired connection and wireless built-in BLE.

The LMSH-CR Wireless Configuration Tool is a handheld tool for advanced remote configuration of Wattstopper Digital Lighting Management (DLM) Shade Systems. 

The QMotion QzHub3 with Zigbee is the latest in advanced wireless shading. The QzHub3 allows for easy network creation and shade control anywhere in your home.

The new QdR2 remote for Gen 3 shades is designed to be more sleek and user friendly. Each remote comes with 6 buttons to support Up, Down and preset positions 20%, 40%, 60%, 80% with each lower button lowering the shade further.

Available in single- and multi-channel options, the Gen 3 QdR2 remotes provide local control of Gen 3 shades.

The multi-channel Zigbee HA1.2 QdR2 Remote provides local control of Qdavanced battery and QIS wired shades. With intuitive preset buttons and up/down control, the remote can support an unlimited number of shades on each channel.

The Legrand Shading Systems Spec Series fascia roll roller shade bracket system has options for motor operated shades, manually operated shades, and convertible manual to motorized (MTM) operated shades.

The Designer Series open roll roller shade bracket system has options for motorized, manual, and convertible manual to motorized (MTM) operated shades.

Legrand offers a variety of commercial skylight shades to fit commercial buildings.

Commercial Light shelves offer complete daylighting control by redirecting sunlight.

ES Shade Systems are a flexible solution for oversized, dual and coupled automated shades.

The TS Motorized Series is our easy to install casette style shade system.

The TS Manual Series is our easy to install casette style shade system.

The QMotion Range Extender QMOLEEDZRX enhances and extends the range of the Zigbee network.

Redesigned to be smaller, sleeker and easier to install, the QIS Power and Communication panel provides power to QIS shades and allows for wired third party integration.

QIS Wired Wall Switches are available in single-channel and multi-channel options to provide in-wall, wired control of QIS shades.

The Remote Locking Station allows the user to lock the Legrand Shading QDR2 remote into the wall plate so it remains in place.

The Qbasic+ system offers a unique premium manual shade experience that is field upgradable to motorized without complications of needing to change fabric or major bracket reinstallation.

Safe by design, Qfree shades are free of external cords and wires. Featuring smooth operation, these shades are an excellent solution where child safety is a concern.