Search radiant
explore our collections

120V Single Pole Vacancy Sensor, Tri-Color
Sorry! That combination does not exist.
General Info
Color: Tri-Color (Ivory, White, Light Almond)
Number Of Poles: 1
Number Of Wires: 2
Listing Agencies/Third Party Certifications
RoHS: Yes
cULus: Yes
UN SPSC: 39121502
Construction Information
Component 4: 78500749658
Depth (US): 1.88"
Height (US): 2.63"
Width (US): 1.69"
Technical Information
Volts (AC): 120VAC, 60Hz
Watts: 0-600W All
Country Of Origin
Country Of Origin: CHINA
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
LEED Contribution: Yes
You Might Like
Tru-Universal Single Pole/3-Way Dimmer, Tri-Color
(3 Reviews)
120V Single Pole/3-Way Occupancy Sensor, Tri-Color
(3 Reviews)
4-Button Digital Timer, White
(23 Reviews)
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 59ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

How is the length of time for the light to be on adjusted on the motion sensor wall control. Electrician threw the directions away after he installed?

Asked by: big mike
You can adjust the time delay on the sensor by using Table 1 in the attached instruction sheet.
Answered by: Legrand Technical Support
Date published: 2019-09-10

I lost my instruction sheet for the Radiant Motion Sensor light switch. How do I change the 30 second delay to 10 minutes?

Asked by: Teddy
Here is the link to the complete instruction sheet for the Radiant Vacancy sensor(Model # RRW600VTC): See TABLE 1 for adjusting your time delay.
Answered by: Legrand Technical Support
Date published: 2019-03-28

How do you temporarily turn off the motion sensor and maintain the light on? Ive looked through the installation instructions and found no instructions on how to turn off sensor

Asked by: ShaRON
Thank you for your question regarding the Radiant Manual ON Vacancy sensor(Model # RRW600VTC). This sensor does not have an over-ride that will disable the sensing feature.
Answered by: Legrand Technical Support
Date published: 2018-10-15

How do you program this switch to stay on longer,than 30'seconds? 30 minutes would be ideal.

Asked by: Betty
Thank you for your question regarding Radiant Vacany Sensor(Model # RRW600VTC). See Table 1 in the instructions for your Time Delay Settings: With the load ON or OFF, hold down the ON/OFF button for 10 seconds, then release LED will blink 5 times and then turn off. Enters Time Delay Adjustment Mode For 30 Minute time delay - Push down the ON/OFF LED unitl LED flashes quickly five times ON per 1.5s. - Set the time delay to 30 Minutes. Save/Exit - Hold down the ON/OFF button for 10 seconds, then release Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays)
Answered by: Legrand Technical Support
Date published: 2018-11-25
  • y_2020, m_1, d_27, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_RRW600VTC, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 32ms
  • bvseo-msg: The getReviews method is only supported when is configured for structured markup. Please submit a support ticket at to have your Bazaarvoice configuration updated to use for structured markup.;

Chat Is Currently Offline

Leave a message here to request a call back from our customer support team.