text.skipToContent text.skipToNavigation

Front of FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFS

Side of FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFS port

Side of FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFS

Back of FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFS

FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFS

LMFI-111 Wattstopper

The LMFI-111 is a power converter and is intended to be wired to a fixture’s 0–10V LED driver to control light levels. It is to only be used in conjunction with the LMFS-601 when the lighting fixture is utilizing a 0–10V LED driver and not a DALI driver that can provide bus power.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Required when 0-10V LED Driver is used instead of DALI Driver
Provides power (16mA) to the LMFS-601-W
The LMFI-111 receives commands from the LMFS-601 via the DALI bus in which the two devices are connected
The LMFI-111 internally converts the commands into a 1–10V analog signal to the connected lighting load
The LMFI-111 takes in line voltage and converts power to the LMFS-601 via the DALI bus