Power Packs and Load Controllers
Presenting the industry's most comprehensive selection of plug load controls and power packs, Wattstopper can help you meet new ASHRAE 90.1 and Title 24 energy code requirements.
Plug Load Controllers should be installed to switch outlets for lighting and non-essential equipment in private offices, open offices, lunch rooms and break rooms and other areas in commercial buildings. They are appropriate for LEED projects and help building owners realize a higher return on investment on energy code-required occupancy sensors.
Wattstopper also has several power packs and power supplies that fill the needs of a variety of special applications. These products help to make lighting control installations more cost efficient and flexible.
Wattstopper power packs are the cornerstone of any low voltage lighting control system. They reliably switch high voltage loads in response to low voltage signals – from control devices such as occupancy sensors, daylighting controls, lighting control panels, and switches. Just as no two applications are alike in terms of their lighting control needs, the same is true of power packs. That’s why Wattstopper offers more choices in power pack configurations and models than any other controls manufacturer.
We recognize that unique applications demand unique solutions. Many applications require conventional switching without any additional specialized functionality. Wattstopper’s standard power packs provide superior reliability in performance teamed with more flexibility in wiring and installation. Specialized Power Packs for applications where control strategies demand greater flexibility and sophistication, Wattstopper developed power packs offering a range of specialized features and functions, including load shedding, Hold-ON and Hold-OFF, and dimming.
Full-featured dual voltage power packs provide operating voltage to Wattstopper occupancy sensors. Enable special applications in conjunction with lighting control panels or building management systems.
Brand
Choose from one of Legrand's brands.
Type
Value that Specifically Names the Type/the Application Value of the Closest Piece of Equipment/the Designated Type of Construction/the Generic Type/the Manufacturer Type Designation/the Specific Function/the Type of Application
Color
The color of the product itself
Product Certifications
Trust in quality and compliance. Use this filter to find products that have undergone thorough testing and evaluation to ensure they meet the quality and safety standards for a wide range of certifications.
Number of Receptacles
The Number of Electrical Wall Outlets Designed for Use with a Plug
Amperage
Maximum electrical current the conductor or device can carry before sustaining immediate or progressive deterioration
Indoor/Outdoor
Enviromental Conditions rating on the product. Indoor Only, Outdoor, Both
Input Voltage
The Difference of Electrical Potential Between Two Points of an Electrical or Electronic Circuit Entering a System
Output Voltage
The Voltage Measured at the Output Terminals of a Power Supply
Number of Devices
The amount of devices the product can connect to.
Cord Length
The Linear Extent of Cord in Space from one End to the Other
Product Family
Used to identify and differentiate offerings within a particular product line. Product families are typically treated as adjectives. It is not recommended to use the product line (ex: Wiremold®) and product family names (Evolution™) together. This will introduce a level of unnecessary confusion for the audience.
Cable Length
The Longest Dimension of Insulated Conductors
Connection TypeTooltip Title
Style or Type of Connection Used
Maximum Surge Current
A Short-Duration, high-Amperage Electric Current Wave that May Sweep Through an Electrical Network
Sensing Range
The total Possible Sensing Capability of the Sensor, Beginning After the Deadband, and Extending Out as Far as the Sensor is Able to Reach Effectively
Voltage
The Rate at Which Energy is Drawn from a Source that Produces a Flow of Electricity in a Circuit
Product Has Potential to Contribute to LEED
This product contributes to earning credits in the LEED rating system.
Features
Unique characteristics and functionality that set the product apart from others in its field.
Sensor Technology
The technology used by a device to sense a change in signal or stimulus.
Warranty Type
The product warranty that accompanies the specific product.
Application Sector
Used to categorize products based on the specific areas or sectors in which they are intended to be used.
Sensor Type
The Device that Receives a Signal or Stimulus (As Heat or Pressure or Light or Motion Etc.) and Responds to it in a Distinctive Manner
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Power Pack, 277 VAC, 6A N/O, 3A N/C, 100 mAA277C-P WattstopperWattStopper has several power packs and power supplies that fill the needs of a variety of special applications.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Half Controlled 15-amp Receptacle, BlackWRC-15-1-B WattstopperWireless Receptacle Control products facilitate Auto-On/AutoOff occupancy-based control of plug loads without the need to wire receptacles to power packs.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR DROP MT SENSOR BLE 1 20-480V 10FT LENS - BRONZEFSP-321B-D-L2-BR WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DALI 0-10 OUTDOOR PIR SENSOR HI MOUNT KO MOUNT GRAYFDP-301-L7-TG WattstopperThe FDP sensor series allows your lighting fixtures to participate in the internet-of-things (IoT) revolution.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR STRAIGHT MT SENSOR BLE 12-32V 10FT LENS - BRONZEFSP-301B-S-L2-BR WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR Straight Mount Sensor, BLE, 120-277V, 10 ft Lens, BronzeFSP-311B-S-L2-BR WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Hi/Lo PIR Drop Nipple Mount Sensor, 120-480V, 10 ft lens, WhiteFSP-221B-D-L2-W WattstopperThe FSP-2x1B sensors provide multi-level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR STRAIGHT MT SENSOR BLE 120-480V 10FT LENS -GREYFSP-321B-S-L2-G WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM 1-RELAY ROOM CONTROLLER 0- 10V 16A METEREDLMRC-111-16M WattstopperLMRC-111-16M room controllers include one relay capable of switching a 16 amp load, a high-efficiency intelligent switching power supply and both Class 1 and Class 2 0-10 volt outputs for control of dimmable loads including compatible LED drivers or electronic ballasts.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Hi/Lo PIR Straight Side Mt Sens, 120-480V, 40ft lensFSP-221B-S-L7-W WattstopperThe FSP-2x1B sensors provide multi-level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.FDP Mask, Traffic GreyFDP-M1-TG WattstopperThe FDP sensor series allows your lighting fixtures to participate in the internet-of-things (IoT) revolution.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DALI 0-10 OUTDOOR PIR SENSOR LO MOUNT KO MOUNT GRAYFDP-301-L2-TG WattstopperThe FDP sensor series allows your lighting fixtures to participate in the internet-of-things (IoT) revolution.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.1/2 KO DLM cable connector for LMFC fixture integratedLMFC-RJ-50-24 WattstopperThe LMFC-xRJ provides fixture connectivity to the DLM local network via a single- or dual-port RJ45 wiring whip connector.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Infusion Controller IIBACNET-IP-IC WattstopperThe controller is the main brain of the system and is capable of supporting all Wattstopper user interfaces, including Equinox touchscreens.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Infusion Controller II (Enclosure)ISME-36 WattstopperThe controller is the ““main brain" of the system and is capable of supporting all Wattstopper user interfaces, including Equinox touchscreens.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DMX DALI GATEWAYDMX-DALI-GW WattstopperThe DMX-DALI-GATEWAY (DMX-DALI-GW) provides a full DMX universe of 512 channels as well as 64 channels of DALI control in one simple solution.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Partition SensorPARTITION-SENSOR WattstopperThe Wattstopper PARTITION-SENSOR uses an infrared transmitter/receiver pair to detect partition opening and closing and, in conjunction with other Architectural Dimming products, coordinates lighting and shade preset functions in areas such as partitioned meeting rooms or ballrooms.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.CONTACT INPUT Stn 10 - DINCIS10-DIN WattstopperThe DIN Contact Input Station is part of Wattstopper's Architectural Dimming system and provides a single integration point for a large variety of sensor inputs and external switches.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR DROP MT SENSOR BLE 1 2-32V - 20FT LENS - BLACKFSP-301B-D-L3-B WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR DROP MT SENSOR BLE 1 20-277V - 10FT LENS - WHITEFSP-311B-D-L2-W WattstopperThe FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.FDP Mask, WhiteFDP-M1-W WattstopperThe FDP sensor series allows your lighting fixtures to participate in the internet-of-things (IoT) revolution.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.0-10V PIR in FIXTURE SENSOR BL E12-32VFSP-301 WattstopperThe FSP-3x1 sensors provide continuous dimming intensity control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Low Voltage (12-32VDC) 0-10V PIR FixtureFSP-202 WattstopperFSP-2x2 sensors provide multi-level control based on motion and/or daylight contribution.Other Options Available
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM WIRELESS PLUGLOAD CONTROLLER 20A METEREDLMPL-611-20M WattstopperLMPL-611-20M Plug Load Controllers include a 20 amp relay for on/ off control of connected outlets, and a high-efficiency switching power supply.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Fixture Sensor Cable Kit for Non-FS Power PackFS-CK-2 WattstopperThe FS-PP Fixture Power Pack provides 24 VDC operating voltage to the FS Low Voltage Sensor series via the RJ45 connector built onto each sensor.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM N4 JACE8000-SM, MAX 125 ROOMS, 1YR SW MAINT INCLLMJA-8125-SM WattstopperThe LMJA-8xxx-SM is a Network Controller that runs on Niagara N4.9 designed to communicate with Wired and Wireless DLM Network Bridges, for local in-room wired networks and/or LMCP panels
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Integrated Fixture Sensor & ControllerLMFS-601-W WattstopperThe LMFS-601 is a wireless fixture sensor and controller that is compatible with all wireless DLM.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.FIXTURE INTERFACE, 120-277V, 0 -10V OUTPUT, POWER to LMFSLMFI-111 WattstopperThe LMFI-111 is a power converter and is intended to be wired to a fixture's 0–10V LED driver to control light levels
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.DLM 1-RELAY ROOM CONTROLLER 0- 10V 16A METERED USALMRC-111-16M-U WattstopperLMRC-111-16M room controllers include one relay capable of switching a 16 amp load, a high-efficiency intelligent switching power supply and both Class 1 and Class 2 0-10 volt outputs for control of dimmable loads including compatible LED drivers or electronic ballasts.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.High/Low PIR Fixture Sensor Universal Voltage, 120-480VACFSP-221B WattstopperThe FSP-2x1B sensors provide multi-level control based on motion and/or daylight contribution.Other Options Available