COVID-19 Update
A message from John Selldorff on the COVID-19 virus and what LNCA is doing in response.
4-Port Gigabit Router/Switch
Sorry! That combination does not exist.
Find a Store
General Info
Cable Type: Category 5e/6
Color: Platinum Grey
Footprint: Double-bay design for structured wiring enclosure
Number Of Ports: 5-Port Gigabit Switch or 4-Port Gigabit Router
Typical Applications: Residential
Connection Type: RJ45
Type: Network Router
Listing Agencies/Third Party Certifications
RoHS: Yes
FCC Standard: Yes
Construction Information
Installation Location: Enclosure
Depth (Metric): 122 mm
Depth (US): 4.80"
Height (Metric): 22 mm
Height (US): 0.87"
Width (Metric): 108mm
Width (US): 4.25 in
Product Weight (US): 0.60 lb
Technical Information
Amps: 1A
Bracket Required: Mounting Plate Included
External Power Input: AC Adapter
Humidity: 5%~90%, non-condensing
Jack Connectors: RJ45
LAN Ports: 4
Material: ABS
Mounting: Enclosure
Operating Temperature (Celsius): 0~50º C
Power Requirements: 12VDC @ 1A
Product Fits Into: On-Q Enclosure
Reset: Reset button on Router
Supported Standards: IEEE 802.3; IEEE 802.3u; IEEE 8.02.3ab; IEEE 10Base-T; IEEE 100Base-T; IEEE 1000Base-T; IEEE 802.3x flow control; IEEE 802.3D MAC bridge; IEEE 802.3D Spanning Tree
Volts (DC): 12V DC
Watts: 6W
Number Of Outlets: 5
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 78ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

When trying to upload the latest firmware to my router, the window says that it completed correctly and to wait 90 seconds. After that 90 seconds, the window reloads and it still says a build date from several years ago. Any ideas?

Asked by: rwils
The version on the site that says 2.6 was given a faulty filename and listing in the site. The current firmware version for this device is 1.3.
Answered by: Jeffrey M.
Date published: 2020-04-24

Hello, I am updating the firmware of ON-Q router 1054 since versión 1.3 to version 2.6...The process is completed, but in the information shows 1.3 again...your have some idea?

Asked by: deisy
Just called in to see what the dealio is and they said that even when you upload the one from the website it shows 1.3463b150302 and that is the latest. Uhm, ok?
Answered by: WayneS
Date published: 2019-09-04

How do I change the wifi network name and password? T

Asked by: David
Hello, This product is not a wireless router. It is wired only and does not have the ability to change the wireless password or name. You likely have another access point connected to this router that is managing your wireless network. Thank you.
Answered by: Romier S
Date published: 2019-09-04

Same question asked by everyone else - how to upgrade Firmware. I have the latest Firmware file downloaded from LeGrande, as Romier keeps telling people. I'm using Chrome, as he also told people. How about a detailed answer from SUPPORT?

Asked by: Dennis
Hello, The process for logging into the router and upgrading the firmware is covered in the Owner's manual which can be downloaded here: If you're not finding that information, here are the steps: First you would need to log into the router. 1. The default IP address is You would type that IP address into your address bar in your browser (in your case Chrome). NOTE: The steps below assume that your PC’s network interface card is set to DHCP, or in other words, to obtain IP addressing automatically. The steps also assume that the 4 Port Gigabit Router/Switch is set to its default settings and that all the cables previously discussed are properly connected. It is also possible to perform these steps by configuring your computer (with installed Ethernet Network Interface Card) to talk to the Router/Switch on its specific IP subnetwork ( The Router/Switch’s default IP address in that subnetwork is, so your PC’s Ethernet Card can be temporarily assigned an IP address, (like, on that same subnetwork to talk to and configure the Router/Switch. Giving the PC a specific IP address is also called assigning it a Static IP address, as compared to a Dynamic IP address that is typically assigned by a service provider when your PC’s network interface card is configured for Dynamic Host Configuration Protocol (DHCP). 2. Hit Enter 3. It will ask for a username and password. The user/pass is admin/admin. 4. Once logged into the router, you will want to select the "Management" option on the left. 5. Under Management is an option for Firmware. 6. You can upgrade the firmware from this screen. 7. Press the "Choose File" button to select the firmware file that you downloaded. You'll want to make sure to point it to the proper folder. 8. Once the file has been selected, hit the "Upload" button. 9. The router will reboot itself once it has completed the upgrade. That will complete the firmware upgrade process. If you are still experiencing issues. I would highly recommend that you contact us diretly at 717-546-5412. That will get you through to the queue where we can walk you through this process to ensure that it works correctly. Thank you.
Answered by: Romier S
Date published: 2019-07-28

I currently have DA1054_v3463_20140917 installed.  Is this the latest firmware version?  Thanks

Asked by: KJohn
Hello, You can check for additional firmware releases here: The current version should be installed with that download. I believe you are one version behind. Thank you.
Answered by: Romier S
Date published: 2019-07-28

As of 5/2018, is there an upgrade for this product?

Asked by: JoeyG
Hello, The latest firmware for this product is available on our website. You can download the latest version here (V2.6): Thanks!
Answered by: Romier S
Date published: 2020-04-23

The user guide states: "Access Control .Using the Access Control feature, you can assign LAN users to different groups, and determine which Internet services are available to each group." I cannot find the access control feature. Where is it?

Asked by: VernonX

What is the maximum distance you can run a CAT 5e or 6 cable to a DA 1101 without signal degradation?

Asked by: Mike
  • y_2020, m_8, d_6, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_DA1054, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 109ms
  • bvseo-msg: The getReviews method is only supported when is configured for structured markup. Please submit a support ticket at to have your Bazaarvoice configuration updated to use for structured markup.;