text.skipToContent text.skipToNavigation

Horizontal Reducing Tee

The aluminum I-beam design of ITray is perfect for industrial installations with large diameter cables in long span situations, minimizing total tray width and creating a smooth transition between straight sections and fittings. A structural offset in the sidewall creates strong, mid-span splices that need fewer supports. Each splice snaps in place and stays without holding, Additionally, only four bolts are needed for each splice reducing hardware needs by 50%. These features allow Itray to be installed up to 30% faster than standard tray.

Height 7.023 in

4.023 in
4.241 in
4.875 in
5.023 in
5.241 in
5.875 in
5.899 in
6.023 in
6.241 in
6.301 in
6.703 in
6.875 in
6.899 in
7.023 in
7.241 in
7.301 in
7.507 in
7.703 in
7.899 in
8.31 in
8.301 in
8.507 in
8.703 in
8.899 in
9.31 in
9.123 in
9.301 in
9.507 in
9.703 in
9.926 in
10.31 in
10.123 in
10.507 in
10.926 in
11.31 in
11.123 in
11.926 in
12.123 in
12.926 in
None

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Material: Aluminum Alloy 6063 and 5052
Finish: Plain
Bottom: LD: 1'' wide rung
Construction: Welded
Tray Design: Tray construction and
Connectors: All fittings are supplied with
Fitting Heights (H): 4'', 5'', 6'', 7''

Specifications

General Info

Color	Aluminum
Type	Horizontal Tees
Material	Aluminum
Finish	Aluminum
Application Sector	Commercial, Industrial
Product Line	Cablofil
Country Of Origin	Mexico
Bottom Type	Ladder
UPC Number	800388114128

Dimensions

Product Depth US	51.625 in
Product Height US	5.241 in
Product Volume US	6.576 cu ft
Product Width US	42.0 in
Product Weight US	13.305 lb
Tray Height	5 in
Radius	12 in